3ware 8006-2LP PCI-X SATA 2 HDD KIT
 
Bezeichnung 3ware Escalade 8006-2LP
BUS-Art 64-Bit/66MHz PCI-X (32-Bit kompatibel)
Kanäle 2x S-ATA/150 (eine Festplatte pro Kanal)
max. Array verwaltet bis zu 2 TB (Terabyte)
Cache 2 MB (nicht erweiterbar)
RAID-Level RAID 0, 1, JBOD
Features Voller Hot Swap + Hot Spare Support
Sonstiges R5 Fusion Technologie (verbesserte RAID5 Perform.)
Drive Activity LED Support
Betriebssysteme Windows 2000/XP/2003, RedHat/SuSE Linux
Zubehör Handbuch, Treiber-CD, 2x S-ATA-Datenkabel,
Low-Profile-Slotblech
Optional Parallel-ATA-Support mit 3ware PATA-SATA-Adapter
Herst.garantie 3 Jahre

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340307 136,00 €   
Lieferzeit: 4 - 10 Tage                                                                     

3ware 9500S-4LP SATA 4 HDD KIT***
 
- RAID 0/1/5/10 SATA-Controller für 4 HDD
- Zubehör: Handbuch, Treiber-CD, 4x SATA-Kabel,
- inkl. Low-Profile-Slotblech
Bezeichnung 3ware Escalade 9500S-4LP
BUS-Art 64-Bit PCI 2.2 (32-Bit kompatibel)
Kanäle 4x S-ATA/150 (eine Festplatte pro Kanal)
max. Array verwaltet bis zu 3 TB (Terabyte), 64-bit LBA Supp.
Cache 128 MB ECC protected SD-RAM, erweiterbar bis 1GB
RAID-Level RAID 0, 1, 5, 10, JBOD
Features Voller Hot Swap + Hot Spare Support
Verwaltet mehrere logische Volumes und RAID Level
Sonstiges R5 Fusion Technologie (verbesserte RAID5 Perform.)
Drive Activity LED Support
Betriebssysteme Windows 2000/XP/2003/Vista, RedHat/SuSE Linux
Zubehör Handbuch, Treiber-CD, 4x S-ATA-Datenkabel
Low-Profile-Slotblech
Optional Parallel-ATA-Support mit 3ware PATA-SATA-Adapter
Herst.garantie 3 Jahre

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340401 313,00 €   
Lieferzeit: 3 - 8 Tage                                                                       

3ware 9500S-8 SATA 8 HDD KIT***
 
- RAID 0/1/5/10 SATA-Controller für 8 HDD
- Zubehör: Handbuch, Treiber-CD, 8x SATA-Kabel
Bezeichnung 3ware Escalade 9500S-8
BUS-Art 64-Bit PCI 2.2 (32-Bit kompatibel)
Kanäle 8x S-ATA150 (eine Festplatte pro Kanal)
max. Array verwaltet bis zu 3 TB (Terabyte), 64-bit LBA Supp.
Cache 128 MB ECC protected SD-RAM, erweiterbar bis 1GB
RAID-Level RAID 0, 1, 5, 10, JBOD
Features Voller Hot Swap + Hot Spare Support
Sonstiges R5 Fusion Technologie (verbesserte RAID5 Perform.)
Drive Activity LED Support
Betriebssysteme Windows 2000/XP/2003/Vista, RedHat/SuSE Linux
Zubehör Handbuch, Treiber-CD, 8x S-ATA-Datenkabel
Optional Parallel-ATA-Support mit 3ware PATA-SATA-Adapter
Herst.garantie 3 Jahre

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340402 548,00 €   
Lieferzeit: 4 - 10 Tage                                                                     

3ware 9550SXU- 4LP PCI-X SATA-II 4 HDD KIT
 
Bezeichnung 3ware Escalade 9550SX-4LP
BUS-Art 64-bit/133MHz PCI-X (64bit only)
Kanäle 4x SATA-II (eine Festplatte pro Kanal)
max. Array verwaltet bis zu 3 TB (Terabyte), 64-bit LBA Supp.
Cache 128 MB ECC protected DDR2-RAM (nicht erweiterbar)
RAID-Level RAID 0, 1, 5, 10, JBOD
Features Voller Hot Swap + Hot Spare Support
Sonstiges R5 Fusion Technologie (verbesserte RAID5 Perform.)
Drive Activity LED Support
Betriebssysteme Windows 2000/XP/2003/Vista, RedHat/SuSE Linux
Zubehör Handbuch, Treiber-CD, 4x S-ATA-Datenkabel,
Low-Profile-Slotblech

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340421 326,00 €   
Lieferzeit: 3 - 8 Tage                                                                       

3ware 9550SXU- 8LP PCI-X SATA-II 8 HDD KIT
 
Bezeichnung 3ware Escalade 9550SX-8LP
BUS-Art 64-bit/133MHz PCI-X
Kanäle 8x SATA-II (eine Festplatte pro Kanal)
max. Array verwaltet bis zu 3 TB (Terabyte), 64-bit LBA Supp.
Cache 128 MB ECC protected DDR2-RAM (nicht erweiterbar)
RAID-Level RAID 0, 1, 5, 10, 50, JBOD
Features Voller Hot Swap + Hot Spare Support
Sonstiges R5 Fusion Technologie (verbesserte RAID5 Perform.)
Drive Activity LED Support
Betriebssysteme Windows 2000/XP/2003/Vista, RedHat/SuSE Linux
Zubehör Handbuch, Treiber-CD, 8x S-ATA-Datenkabel,
Low-Profile-Slotblech

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340422 522,00 €   
Lieferzeit: 3 - 8 Tage                                                                       

3ware 9550SXU-16 PCI-X SATA-II ML 16 HDD KIT***
 
Bezeichnung 3ware Escalade 9550SX-16ML
BUS-Art 64-bit/133MHz PCI-X
Kanäle 4x ML-Connector für 16x SATA-HDD
max. Array verwaltet bis zu 3 TB (Terabyte), 64-bit LBA Supp.
Cache 256 MB ECC protected DDR2-RAM (nicht erweiterbar)
RAID-Level RAID 0, 1, 5, 10, 50, JBOD
Features Voller Hot Swap + Hot Spare Support
Sonstiges R5 Fusion Technologie (verbesserte RAID5 Perform.)
Drive Activity LED Support
Betriebssysteme Windows 2000/XP/2003/Vista, RedHat/SuSE Linux
Zubehör Handbuch, Treiber-CD, 4x SATA-Kabelpeitsche (1>4)

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340427 915,00 €   
Lieferzeit: 4 - 10 Tage                                                                      • Leasingangebot erstellen

3ware 9650SE- 2LP PCI-E SATA-II 2 HDD KIT
 
3ware 9650SE Features

8th-generation StorSwitch™ non-blocking switched
architecture
On-board I/O RISC processor and RAID offload
provides true hardware RAID
- SCSI device driver model to take advantage of
the benefits of SCSI using inexpensive Serial ATA
drives
Bootable array support for greater fault tolerance
Variable stripe size for performance tuning by
application
64-bit LBA support
ATA pass-through mode support
Up to 512MB DDR2 533 memory with ECC protection
(see table below)
32 pooled DMA channels
Complete configuration management suite
- 3ware BIOS Manager 2 (3BM2) – easy to use BIOS
configuration tool
- 3ware Disk Manager 2 (3DM®2) – browser-based
management tool
- Command Line Interface (CLI) – scriptable
configuration tool
SNMP support
SMTP support for email/pager notification
ATA/6 and Out of band (OOB) staggered drive
spin-up support
Auto carving allows LUNs > 2TB to be divided into
multiple units for legacy operating systems
limited to 2TB max. per LUN
Battery Backup Unit (BBU) support
Multiple logical unit sizes and RAID levels on
one card
Multiple card support within a system for large
storage requirements
Hot-swap and hot-spare support for data
availability
Dynamic sector repair for robust data protection
S.M.A.R.T. disk drive monitoring for reliability
Emergency Flash Recovery protects against failed
firmware upgrade
Drive activity LED support
Online Capacity Expansion and RAID Level
Migration
Enhanced data protection with write journaling
for non-redundant arrays and accidental drive
removal
Drive insertion and removal notification
Array/Drive Status and drive identification LED
support. (requires 3ware Chassis Control
Unit-enabled backplane)
Chassis Control Unit for enclosure management via
I2C

Operating System Support

Microsoft® Windows® 2003/XP/2000/Vista,
Red Hat Linux, SuSE Linux, Fedora Linux,
2.4/2.6 Linux kernel, FreeBSD; 32/64-bit driver
support for Windows, Linux and FreeBSD
For complete OS listing, Go to:
www.3ware.com/support/OS-Support.asp

Model 9650SE-2LP
Form Factor Low Profile
Port Count 2
PCI Express Lanes 1
Raid Levels 0,1, Single Disk,JBOD
Onboard Memory 128 MB DDR2 533
Connector Type Discrete SATA
BBU Support No

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340435 195,00 €   
Lieferzeit: 3 - 8 Tage                                                                       

3ware 9650SE- 4LPML PCI-E SATA-II 4 HDD KIT
 
3ware 9650SE Features

8th-generation StorSwitch™ non-blocking switched
architecture
On-board I/O RISC processor and RAID offload
provides true hardware RAID
- SCSI device driver model to take advantage of
the benefits of SCSI using inexpensive Serial ATA
drives
Bootable array support for greater fault tolerance
Variable stripe size for performance tuning by
application
64-bit LBA support
ATA pass-through mode support
Up to 512MB DDR2 533 memory with ECC protection
(see table below)
32 pooled DMA channels
Complete configuration management suite
- 3ware BIOS Manager 2 (3BM2) – easy to use BIOS
configuration tool
- 3ware Disk Manager 2 (3DM®2) – browser-based
management tool
- Command Line Interface (CLI) – scriptable
configuration tool
SNMP support
SMTP support for email/pager notification
ATA/6 and Out of band (OOB) staggered drive
spin-up support
Auto carving allows LUNs > 2TB to be divided into
multiple units for legacy operating systems
limited to 2TB max. per LUN
Battery Backup Unit (BBU) support
Multiple logical unit sizes and RAID levels on
one card
Multiple card support within a system for large
storage requirements
Hot-swap and hot-spare support for data
availability
Dynamic sector repair for robust data protection
S.M.A.R.T. disk drive monitoring for reliability
Emergency Flash Recovery protects against failed
firmware upgrade
Drive activity LED support
Online Capacity Expansion and RAID Level
Migration
Enhanced data protection with write journaling
for non-redundant arrays and accidental drive
removal
Drive insertion and removal notification
Array/Drive Status and drive identification LED
support. (requires 3ware Chassis Control
Unit-enabled backplane)
Chassis Control Unit for enclosure management via
I2C

Operating System Support

Microsoft® Windows® 2003/XP/2000/Vista,
Red Hat Linux, SuSE Linux, Fedora Linux,
2.4/2.6 Linux kernel, FreeBSD; 32/64-bit driver
support for Windows, Linux and FreeBSD
For complete OS listing, Go to:
www.3ware.com/support/OS-Support.asp
Model 9650SE-4LPML
Form Factor Low Profile
Port Count 4
PCI Express Lanes 4
Raid Levels 0,1,5,10,Single Disk,JBOD
Onboard Memory 256 MB DDR2 533
Connector Type Multi-lane
BBU Support Yes

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340431 326,00 €   
Lieferzeit: 3 - 8 Tage                                                                       

3ware 9650SE- 8LPML PCI-E SATA-II 8 HDD KIT
 
3ware 9650SE Features

8th-generation StorSwitch™ non-blocking switched
architecture
On-board I/O RISC processor and RAID offload
provides true hardware RAID
- SCSI device driver model to take advantage of
the benefits of SCSI using inexpensive Serial ATA
drives
Bootable array support for greater fault
tolerance
Variable stripe size for performance tuning by
application
64-bit LBA support
ATA pass-through mode support
Up to 512MB DDR2 533 memory with ECC protection.
(see table below)
32 pooled DMA channels
Complete configuration management suite.
- 3ware BIOS Manager 2 (3BM2) – easy to use BIOS
configuration tool
- 3ware Disk Manager 2 (3DM®2) – browser-based
management tool
- Command Line Interface (CLI) – scriptable
configuration tool
SNMP support
SMTP support for email/pager notification.
ATA/6 and Out of band (OOB) staggered drive
spin-up support
Auto carving allows LUNs > 2TB to be divided into
multiple units for legacy operating systems
limited to 2TB max. per LUN
Battery Backup Unit (BBU) support
Multiple logical unit sizes and RAID levels on
one card
Multiple card support within a system for large
storage requirements
Hot-swap and hot-spare support for data
availability
Dynamic sector repair for robust data protection.
S.M.A.R.T. disk drive monitoring for reliability
Emergency Flash Recovery protects against failed
firmware upgrade
Drive activity LED support.
Online Capacity Expansion and RAID Level
Migration
Enhanced data protection with write journaling
for non-redundant arrays and accidental drive
removal
Drive insertion and removal notification
Array/Drive Status and drive identification LED
support. (requires 3ware Chassis Control
Unit-enabled backplane)
Chassis Control Unit for enclosure management via
I2C

Operating System Support

Microsoft® Windows® 2003/XP/2000/Vista,
Red Hat Linux, SuSE Linux, Fedora Linux,
2.4/2.6 Linux kernel, FreeBSD; 32/64-bit driver
support for Windows, Linux and FreeBSD
For complete OS listing, Go to:
www.3ware.com/support/OS-Support.asp
Model 9650SE-8LPML
Form Factor Low Profile
Port Count 8
PCI Express Lanes 4
Raid Levels 0,1,5,6,10,50 Single Disk,JBOD
Onboard Memory 256 MB DDR2 533
Connector Type Multi-lane
BBU Support Yes

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340432 530,00 €   
Lieferzeit: 3 - 8 Tage                                                                       

3ware 9650SE-12ML PCI-E SATA-II 12 HDD KIT
 
3ware 9650SE Features

8th-generation StorSwitch™ non-blocking switched
architecture
On-board I/O RISC processor and RAID offload
provides true hardware RAID
- SCSI device driver model to take advantage of
the benefits of SCSI using inexpensive Serial ATA
drives
Bootable array support for greater fault
tolerance
Variable stripe size for performance tuning by
application
64-bit LBA support
ATA pass-through mode support
Up to 512MB DDR2 533 memory with ECC protection.
(see table below)
32 pooled DMA channels
Complete configuration management suite.
- 3ware BIOS Manager 2 (3BM2) – easy to use BIOS
configuration tool
- 3ware Disk Manager 2 (3DM®2) – browser-based
management tool
- Command Line Interface (CLI) – scriptable
configuration tool
SNMP support
SMTP support for email/pager notification.
ATA/6 and Out of band (OOB) staggered drive
spin-up support
Auto carving allows LUNs > 2TB to be divided into
multiple units for legacy operating systems
limited to 2TB max. per LUN
Battery Backup Unit (BBU) support
Multiple logical unit sizes and RAID levels on
one card
Multiple card support within a system for large
storage requirements
Hot-swap and hot-spare support for data
availability
Dynamic sector repair for robust data protection.
S.M.A.R.T. disk drive monitoring for reliability
Emergency Flash Recovery protects against failed
firmware upgrade
Drive activity LED support
Online Capacity Expansion and RAID Level
Migration
Enhanced data protection with write journaling
for non-redundant arrays and accidental drive
removal
Drive insertion and removal notification.
Array/Drive Status and drive identification LED
support. (requires 3ware Chassis Control
Unit-enabled backplane)
Chassis Control Unit for enclosure management via
I2C

Operating System Support

Microsoft® Windows® 2003/XP/2000/Vista,
Red Hat Linux, SuSE Linux, Fedora Linux,
2.4/2.6 Linux kernel, FreeBSD; 32/64-bit driver
support for Windows, Linux and FreeBSD
For complete OS listing, Go to:
www.3ware.com/support/OS-Support.asp
Model 9650SE-12ML
Form Factor Low Profile
Port Count 12
PCI Express Lanes 8
Raid Levels 0,1,5,6,10,50, Single Disk,JBOD
Onboard Memory 256 MB DDR2 533
Connector Type Multi-lane
BBU Support Yes

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340433 797,00 €   
Lieferzeit: 3 - 8 Tage                                                                        • Leasingangebot erstellen

3ware 9650SE-16ML PCI-E SATA-II 16 HDD KIT
 
3ware 9650SE Features

8th-generation StorSwitch™ non-blocking switched
architecture
On-board I/O RISC processor and RAID offload
provides true hardware RAID
- SCSI device driver model to take advantage of
the benefits of SCSI using inexpensive Serial ATA
drives
Bootable array support for greater fault
tolerance
Variable stripe size for performance tuning by
application
64-bit LBA support
ATA pass-through mode support
Up to 512MB DDR2 533 memory with ECC protection.
(see table below)
32 pooled DMA channels
Complete configuration management suite.
- 3ware BIOS Manager 2 (3BM2) – easy to use BIOS
configuration tool
- 3ware Disk Manager 2 (3DM®2) – browser-based
management tool
- Command Line Interface (CLI) – scriptable
configuration tool
SNMP support
SMTP support for email/pager notification.
ATA/6 and Out of band (OOB) staggered drive
spin-up support
Auto carving allows LUNs > 2TB to be divided into
multiple units for legacy operating systems
limited to 2TB max. per LUN
Battery Backup Unit (BBU) support
Multiple logical unit sizes and RAID levels on
one card
Multiple card support within a system for large
storage requirements
Hot-swap and hot-spare support for data
availability
Dynamic sector repair for robust data protection.
S.M.A.R.T. disk drive monitoring for reliability.
Emergency Flash Recovery protects against failed
firmware upgrade
Drive activity LED support
Online Capacity Expansion and RAID Level
Migration
Enhanced data protection with write journaling
for non-redundant arrays and accidental drive
removal
Drive insertion and removal notification.
Array/Drive Status and drive identification LED
support. (requires 3ware Chassis Control
Unit-enabled backplane)
Chassis Control Unit for enclosure management via
I2C

Operating System Support

Microsoft® Windows® 2003/XP/2000/Vista,
Red Hat Linux, SuSE Linux, Fedora Linux,
2.4/2.6 Linux kernel, FreeBSD; 32/64-bit driver
support for Windows, Linux and FreeBSD
For complete OS listing, Go to:
www.3ware.com/support/OS-Support.asp
Model 9650SE-16ML
Form Factor Low Profile
Port Count 16
PCI Express Lanes 8
Raid Levels 0,1,5,6,10,50, Single Disk,JBOD
Onboard Memory 256 MB DDR2 533
Connector Type Multi-lane
BBU Support Yes

 
Best.-Nr.                  Preis inkl. MWSt. Anzahl
BIC2340434 980,00 €   
Lieferzeit: 3 - 8 Tage                                                                        • Leasingangebot erstellen

11 Artikel gefunden: